FOOD WASTE PROCESSING STATION A COMPACT HIGH CAPACITY FOOD WASTE REDUCTION & DEWATERING UNIT

 

HOW IT WORKS

The food wastes are added to the hopper by the operator, the integrated food waste disposer shreds the food waste into tiny particles, the foods with a flow of water are pumped to the Dehydra Hydro Extractor, where through centrifugal action, the WasteStation forces out the excess liquid from the macerated waste. This “grey water” is fed directly to drain, the resulting solid fraction of the food waste is collected in small, easily managed, lidded bins, ready for onward processing. The Food Waste Processing station incorporates both self cleaning and self rinse of the dewaterer, to reduce the build up of food residues, intelligent sensor to detect when the food waste collection caddy is full, PLC Controls with visual aid for noisy environments.

TECHNICAL SPECIFICATION

Disposer 2.2kw
Pump & Geared Motor 0.55kw
Hydro Exctractor Dehydra 1.1kw
ACC Feed (3ph 4wire) 380-415V   16A
Water Connection Hot   & Cold
Waste Water Connection Required   @ outlet height of 150mm & 54mm diameter
Weight 190kgs
Overall Dimensions 1000W   x 700D x    900H
Feed Opening Dimensions 530W   x 350H
Capacity Up   to 700kgs per hour
1400   covers per hour

INSTALLATION INFORMATION

Water   Connection Inlet: Cold   water supply to disposer shall be 3/4 service line (pressure resistant hose   pipe required) with a standard of 2.5 bar flow pressure, Piped as close to   the unit as possible at a comfortable height from the ground. A gate valve is   required for maintenance. Inlet: Hot water supply shall be 3/4 service line,   pipe as close to the unit as possible at a comfortable height from the ground   with a pressure resistant hose pipe. A gate valve is required to connect an   electrical valve 24VAC. The connection to the Hydro Extractor requires 3/4   piping size
Water Consumption App   20 litres per minute
Sewer Outlet 54MM   DIAM Waste line with siphon to avoid odours
Electrical Connection Power   Input of the unit; 3.9kw
The   Unit Requires a 400V 3ph 50hz Power supply
The   unit requires to be connected to a grounded, permanent wiring system, through   an electrical wall interlocked socket with 4 wires (3ph & earth). 16Amp   fuse required
Reccomendation:   We suggest protecting the power lines upstream of the electrical socket with   suitable fuses and magnothermic switches

 specification can change without prior notice

CONTACT US FOR FURTHER DETAILS