DEHYDRA FOOD WASTE DEWATERING BENCH UNIT 
AVAILABLE STAND ALONE OR AS RETROFIT SYSTEM
FOR EXISTING FOOD WASTE DISPOSER

 

HOW IT WORKS

Food waste is fed into the hopper by the operator and ground into small particles by the food waste disposer. The operation of the whole unit is quick, simple and safe thanks to a design which prevents access to the grinding mechanism while the unit is operating. The ground food waste is then pumped from the disposer into the hydro-extractor. Combining an auger and a screen with a very fine mesh (1 mm diameter holes) the hydro-extractor separates the liquid from the ground food waste. The excess liquid can then be re-circulated to reduce water consumption before being disposed of to a foul drain. Once the food waste has been disposed of the system automatically self cleans to minimise operator time.

BESPOKE OPTIONS

We can fabricate made to measure waste processing stations, with the ability to incorporate corner units, with sink(s), rinsers, splash backs, left or right handed, feed trough, off DIN measurements LWH.  We can also remove existing kitchen benches and modify to take the Dehydra system.
Please contact us with requests

 

TECHNICAL SPECIFICATIONS

Disposer 2.2kw
Pump & Geared Motor 0.75kw
Hydro Exctractor Dehydra 1.1kw
ACC Feed (3ph 4wire) 400v   -16a
Water Connection Hot   & Cold
Waste Water Connection Required
Weight 150kgs
Overall Dimensions 1600mm x 700 x 900 (w x d x h)
   
Capacity Up   to 700kgs per hour
   
   

INSTALLATION INFORMATION

 
   
Water   Connection Inlet: Cold   water supply to disposer shall be 3/4 service line (pressure resistant hose   pipe required) with a standard of 2.5 bar flow pressure, Piped as close to   the unit as possible at a comfortable height from the ground. A gate valve is   required for maintenance. Inlet: Hot water supply shall be 3/4 service line,   pipe as close to the unit as possible at a comfortable height from the ground   with a pressure resistant hose pipe. A gate valve is required to connect an   electrical valve 24VAC. The connection to the Hydro Extractor requires 3/4   piping size
Water Consumption App   20 litres per minute
Sewer Outlet 50MM   DIAM Waste line with siphon to avoid odours
Electrical Connection Power   Input of the unit; 3.9kw
  The   Unit Requires a 400V 3ph 50hz Power supply
  The   unit requires to be connected to a grounded, permanent wiring system, through   an electrical wall interlocked socket with 4 wires (3ph & earth). 16Amp   fuse required
  Recommendation:   We suggest protecting the power lines upstream of the electrical socket with   suitable fuses and magnothermic switches

 specification can change without prior notice

 CONTACT US FOR FURTHER DETAILS